Available in three sizes. There is so much flexibility in this horse grazing muzzle it will fit a variety of horses.
Mini to small pony: Order the 23″ size; small.
Pony, cob or Arabian: Order the 24″ size; medium.
Horse Sizing: 24″ or 25″ Follow guideline below
- My Horse sized halter fits when at the middle hole or above, order the 24″.
- My Horse size halter fits at the bottom hole or two, order the 25″. If you are on the fence, always order DOWN to the smaller size.
Draft or Oversize: Order the 25″; large.
Applying your new muzzle.
What you will need:
- Halter: We recommend you commit a dedicated well fitting breakaway turnout halter to your muzzle.
- 10 Minutes: It generally takes about 10 minutes to get everything perfect the first time you install a Flexible Filly Muzzle. Subsequent halters will take about 3 minutes.
How to begin:
Use the enclosed paper ties or a string to discover the best holes to secure your muzzle to your halter. The paper ties are a temporary tool allowing you to easily adjust the fit.
Once you are satisfied you have the correct holes aligned to the halter please remove the paper ties or string and permanently secure the muzzle with the included cable ties.
How to orient the muzzle:
Two of the “fins” have a triangle cut out. These attach to the square (side) rings on your turnout halter. Three fins will connect to the nose band, one in the center, the other two fall naturally to the sides of center. Three fins will connect to the chin band; one in the center, two naturally to the sides of the center. (see image below).
Securing the muzzle:
First secure each triangle cut out fin with one of the enclosed low profile cable ties. Do not wrap the fins around the halter, doing so may cause rubs.
After finding the best fit for your horse, simply trim the excess fin material just above the top hole being used. It is fine to wait a day or two to ensure your muzzle is a comfortable distance from your horse’s mouth prior to trimming.
How the proper fit looks:
When properly installed, the muzzle should be close to but not touching the nose of the horse. If the muzzle is touching the nose simply make the fins under the chin longer, this will lift the muzzle away from the nose.
The “keeper” on the cable tie are on the outside of the muzzle and the excess is facing down and trimmed close.
If you find there is too much grazing room be sure your fins are snugly secured to your halter. The fins should not move along the nose band. If it does simply pull the cable tie tighter.
Returns and Warranty Information:
Flexible Filly Grazing Muzzles come with a full one month product replacement warranty.